新足迹

 找回密码
 注册

精华好帖回顾

· 穿越时空的Galapagos群岛 (2012-7-2) 长尾鲨 · 2014回顾 (2015-1-2) zzoz
· 第十五天:Stottsdale 小镇闲游,享受鲜美肥鱼大餐。(大量裸图) (2009-5-28) Tiger_Karen · 大头家常菜 -- 蒜子烧海参 (2009-8-23) datou2z
Advertisement
Advertisement
查看: 961|回复: 0

[VIC/TAS] ***Harman Kardon AVR355 AV Receiver*** [复制链接]

发表于 2013-6-28 11:48 |显示全部楼层
此文章由 Ausiewolf 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 Ausiewolf 所有!转贴必须注明作者、出处和本声明,并保持内容完整
本帖最后由 Ausiewolf 于 2013-6-28 20:28 编辑

代朋友发一个广告,参数如下,具体情况请联系我的朋友:
Thana 0478 119 149 (English only)

Harman Kardon AVR355 AV Receiver
HDMI Receiver
7.1 Channel Surround
70Watts RMS

Its a clean unit & Function is as normal

RRP New $1699.00




Stereo Mode:
ContinuousAverage Power (FTC)
AVR 255: 65Watts perchannel, 20Hz- 20 kHz
AVR 355: 70Watts perchannel, 20Hz- 20 kHz
@< 0.07%THD, both channels driven into 8 ohms
7 Channel Surround Modes
Power Per Individual Channel,with allchannels driven
FrontL&R channels:
AVR 255: 50Watts perchannel
AVR 355: 65Watts perchannel
@< 0.07%THD, 20Hz–20kHzinto 8 ohms
Centerchannel:
AVR 255: 50Watts
AVR 355: 65Watts
@< 0.07%THD, 20Hz–20kHzinto 8 ohms
Surround (L & R Side, Back)channels:
AVR 255: 50Watts perchannel
AVR 355: 65Watts perchannel
@< 0.07%THD, 20Hz–20kHzinto 8 ohms
Input Sensitivity/Impedance
Linear (High Level) 200mV/47kohms
Signal-to-Noise Ratio (IHF-A) 100dB
Surround SystemAdjacent Channel Separation
Analog Decoding 40dB
(Pro Logic, etc.)
Dolby Digital (AC-3) 55dB
DTS 55dB
Frequency Response
@1W (+0dB, –3dB) 10Hz–130kHz
High Instantaneous
Current Capability(HCC) ±35Amps
Transient Intermodulation
Distortion (TIM) Unmeasurable
Rise Time 16 µsec
SlewRate 40V/µsec**

FM Tuner Section:
Frequency Range 87.5–108MHz
Usable Sensitivity IHF 1.3 µV/13.2dBf
Signal-to-Noise Ratio Mono/Stereo: 70/68dB (DIN)
Distortion Mono/Stereo: 0.2/0.3%
Stereo Separation 40dB@1kHz
Selectivity ±400kHz: 70dB
Image Rejection 80dB
IF Rejection 90dB



AM Tuner Section:
Frequency Range 522–1620kHz
Signal-to-Noise Ratio 45dB
Usable Sensitivity Loop: 500µV
Distortion 1kHz, 50% Mod: 0.8%
Selectivity ±10kHz: 30dB

Video Section;
Video Format PAL/NTSC
InputLevel/Impedance 1Vp-p/75 ohms
OutputLevel/Impedance 1Vp-p/75 ohms
Video Frequency Response

General:
Power Requirement AC 220–240V/50Hz
Power Consumption AVR 255: Standby < 1W,
540W maximum
AVR 355: Standby < 3W,
890W maximum
(7 channels driven)

Dimensions(Max):
Width 440mm
Height 165mm
Depth 382mm
Weight net AVR 255: 14,0 kg
AVR 355: 14,4 kg

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
粗茶淡饭中找乐子
Advertisement
Advertisement

发表回复

您需要登录后才可以回帖 登录 | 注册

本版积分规则

Advertisement
Advertisement
返回顶部