|
此文章由 remington 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 remington 所有!转贴必须注明作者、出处和本声明,并保持内容完整
More information about ADSL2+ vs Distance
ADSL2+ Sync rates
Less than 1km should be 23-24Mbit
1.0km = 13.81dB = 23Mbit
1.5km = 20.7dB = 21Mbit
2.0km = 27.6dB = 18Mbit
2.5km = 34.5dB = 13Mbit
3.0km = 41.4dB = 8Mbit
3.5km = 48.3dB = 6Mbit
4.0km = 56dB = 4Mbit
4.5km = 62.1dB = 3Mbit
5.0km = 69dB = 2Mbit
hope this helps some of you guys who've been asking as if late
Using my previous post, the distance is around 1.6km - 2.5km (depends on how the cable run, the cable may run longer than what it is showed on the map).
I would say for ADSL2+ in Carlingford Court area is around 10 - 15 Mbit. However, the speed may also affected by the copper quality. I hope these information can help you. |
|