【求助】2wire 2701HGV-W路由器TPG的IPTV设置问题？

woodooo

【求助】2wire 2701HGV-W路由器TPG的IPTV设置问题？
固件是最新的5.29.117.3 带Voip功能。
找不到add PVC的地方。
开了端口1234

服务手册里面写支持8条PVC和8条PPP链路，却找不到设置的地方。
Network Protocol Support
• ATM UNI, UBR, VBRnrt, VBRrt, CBR
• Support up to 8 ATM PVCs in any coni guration
• IPv4, IPv6 capable, TCP, UDP, ARP, ICMP
• DHCP client/server, DNS client/server, HTTP client and server
• Single IP and multi-IP support
• Multicast IGMP Proxy, IGMP Snooping• PPPoE, PPPoA, PAP, CHAP, RFC 2684/1483 Ethernet
• Support up to 8 PPP links and up to 8 PVCs• 802.1x broadband network authentication

与TPG的IPTV设置要求相符
Before you begin, please be aware that your modem needs to have the latest firmware installed and that it must be able to support multiple PVC and IGMP.
We now advise that you make the following changes on your modem:

Create a new connection in the modem user interface
Service name: IPTV
Connection/Mode: bridge mode
Encapsulation/Multiplexing: LLC
VPI: 0
VCI: 35
ATM/QoS: UBR
PVC: enabled
An option for IGMP proxy, or multicast proxy should be enabled

使用手册 http://www.2wire.com/pages/pdfs/2701HG_user_guide.pdf

找到增加链路的页面了
http://192.168.1.254/xslt?PAGE=J47
Multi-Broadband Link – Configuration

但是按ADD NEW LINK按钮系统提示错误
An unknown error has occurred.


[ 本帖最后由 woodooo 于 2010-4-25 23:25 编辑 ]