|
|
此文章由 kolinxu 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 kolinxu 所有!转贴必须注明作者、出处和本声明,并保持内容完整
本帖最后由 kolinxu 于 2017-3-31 21:26 编辑
Arris CM8200 for NBN HFC Status Lights
This article will explain the meaning of the status lights found on the Arris CM8200 Modem, the default nbn™ Connection Box for nbn™ HFC as of 1 March 2017. If you signed up before this date, you may have an Arris CM820 instead.
These lights may help you quickly check on the status of your connection which may be useful when troubleshooting.
Things to note
Note that ONLINE, DOWNSTREAM and UPSTREAM lights will all FLASH briefly when the Connection Box is powered on. This is a self-test and no action is needed, just wait for the Connection Box to finish booting up.
If both UPSTREAM and DOWNSTREAM lights are FLASHING but ONLINE light is OFF, there is no connection to the nbn™ network. Please call us on 13 22 58 for assistance.
If both UPSTREAM and DOWNSTREAM lights are FLASHING and ONLINE light is ON, a firmware update is in progress. No action is needed - simply wait for the update to complete.
Status lights
On the back
The UNI-D1 port on the back of the Connection Box has LINK lights to indicate cable connection to a computer or router.
Green: Cable connection detected. If this light is off, try another CAT5e or CAT6 Ethernet cable.
Yellow: Old CAT5 Ethernet cable is in use - this may not allow throughput of the full speed of your nbn™ HFC service.
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?注册
x
|