|
|
此文章由 huazhengtian 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 huazhengtian 所有!转贴必须注明作者、出处和本声明,并保持内容完整
大家好,有个问题想咨询一下。前一段时间因为管道渗水厨房地板被泡了,开始觉得并不严重。但是前两天揭开地板革一看,下面一层水泥都龟裂开了。
让handyman来看了,一个说很容易150+GST搞定。
另一个看了说这个 150 就是开玩笑。他说这个不是渗漏是完全“湿”了。说这样的已经和混凝土表面脱离了,整个要去掉并且要全干了才能动工。所以要300-450+GST...
有这方面经验的朋友麻烦看一下,这样的工程大概要多少钱?如果真的像第二个说的,那我们就让他干了。下面是第二人的回信。万分感谢
I went past the property today and inspected the damage to the floor.I
I turned back the vinyl flooring and noticed the damage.
The area was wet- Not saturated but wet???
The ’cement/ardit’ that has been used has cracked and come off the concrete substrate. (photo’s attached)
This area will need to be removed and cleaned and Dried.
A primer applied to the concrete to improve the adhesion of the ‘ardit’ to the concrete floor.
The ardit mixed and spread over the area- Allow to dry.
Fold back the vinyl back into position.
The time involved in cleaning, prep and applying product along with the material involved will be between $300 and $450 plus gst-
It depends how things go and if the floor is dry when I get their?
Let me know
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?注册
x
|