|
此文章由 Evo 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 Evo 所有!转贴必须注明作者、出处和本声明,并保持内容完整
本帖最后由 Evo 于 2018-3-18 13:35 编辑
10 Ways to Make Your Traffic Merging Safer on Busy Roads
Here are 10 ways to create safer merging:
- Adjust your speed to match the flow of traffic before entering the roadway.
- Yield to drivers on the freeway, but avoid stopping unless absolutely necessary.
- Find a 3 to 4-second gap in traffic to merge. Solomon's advice: "I never look for the vehicle I want to get ahead of; I look for the vehicle I want to behind
- Check for cars around your vehicle before entering a lane. And remember to check your blind spot. Solomon’s advice: "Your mirrors will only show you where you aim them to look. You must do a head check." Meaning, turn your head to check and see if the way is clear.
- Use your turn signals early, a recommended 100 to 300 feet before merging or changing lanes.
- Wait for the solid line to end before merging - It indicates that lane changes are prohibited.
- Cross one lane of traffic at a time.
- Be prepared for your exit, and maneuver into the far-right lane as you approach it.
- In general, keep up with the speed of traffic until you exit. However, Solomon says it's important to adjust your speed to weather conditions and the design of the exit ramp.
- If you must pass a vehicle, pass on the left and return to your lane once the vehicle is visible in your rearview mirror. Increase this distance when passing larger vehicles.
出处https://www.statefarm.com/simple ... safer-on-busy-roads |
|