|
|
此文章由 jl162401 原创或转贴，不代表本站立场和观点，版权归 oursteps.com.au 和作者 jl162401 所有！转贴必须注明作者、出处和本声明，并保持内容完整
首先谈谈需要点啥：
0.WII Console，呵呵
1.SD卡
2.移动硬盘？
3.下载一个Super Mario的镜像，在verycd上？
4.下载文件包：http://www.mediafire.com/?zogjimgyyqm，20M
安装步骤：
0.升级到4.2， ，澳大利亚的是欧版吧，是4.2E（已经确认，升到最新就是这个版本）
1.Install THE HOMEBREW CHANNEL，参考楼下zn等同学的步骤即可
另外据http://www.digital-kaos.co.uk/fo ... follow-guide-67927/
上提供的链接，可以下以下两个文件，经过多个帖子比较，应该是足够了：
http://bannerbomb.qoid.us/index.new.php（内含下载the HackMii installer）
abd6a_v200.zip 20K
这个文件就是Bannerbomb
Bannerbomb is an exploit capable of launching homebrew from any version of the System Menu. It was created by Comex to replace the Twilight Hack, which does not work on System Menu 4.0. （看到教程提到Twilight Hack，就别在看了，已经过时了）
NOTE: Whilst the original version of Bannerbomb (the version which launches via Data Management) does not support System Menu 4.2, the updated version (launches via the SD Card Menu) does!
The original Bannerbomb exploit does not work with System Menu 4.2, it only works with System Menu 4.1 or older. However Bannerbomb v2 has been released by Comex, and works on 4.2
The exploit works by using a malformed banner to crash the Wii and run code to load the boot.dol placed in the root of the SD card. It can be used to install the Homebrew Channel, DVDx and the BootMii public beta via the HackMii Installer.
hackmii_installer_v0.6.zip 1.5M
4.2的系统一定使用SD卡的图标访问安装程序
2.第二步骤应该是通过HBC安装程序了
主要参考这个链接
http://www.digital-kaos.co.uk/fo ... follow-guide-67927/
System Menu 4.2 Wii’s softmodding process has been updated to include an application called multi mod manager. This one app now does the whole job for you, apart from a few button presses the whole thing is pretty much automated. It’s now more difficult to get it wrong than it is to get it right!!
I’ve also included cios249 version 19 into the packs for all Wii softmods as well as a mod of Wadmanager, called yet another wad manager mod which enables you to batch install a number of wad files. Especially useful for those doing safe upgrades of the system menu.
uLoader has also been updated to version 4.9c. Another reason for doing a new post about this is because a bug in how 4.9A handled the uloader config file was causing a number of hard drives that worked before to fail. This most notably affected the buffalo drives. This problem should now be fixed and those users may now want to upgrade to 4.9".
我明白了，这个帖子是说就装一个MMM，就搞定一切了，包括所谓的USB Loader，这边他提供的版本是4.9c。
主要步骤如下：
Grab the files you need from here,
http://www.mediafire.com/?zogjimgyyqm
Install THE HOMEBREW CHANNEL FIRST................Then.... （参见前面步骤1）
Any black screens or DSI stack errors that may occur during any of the steps below are 99% harmless. Simply power off your Wii and turn it back on, then continue from the step you were on.
1. Copy the contents of the pack you downloaded above onto the root of your SD card keeping the folder structure. Overwrite any existing files.
2. Power on your Wii and go into the Homebrew Channel.
3. Load Multi Mod Manager.
4. Press down then press A to select ‘Install and patch IOS36.’
5. Press A to select Express mode.
6. Loads of text will splash across the screen, when the process has finished press any button on the wiimote.
**If you were only able to install Bootmii to IOS, you may want to install Priiloader now and make a NAND backup of your Wii and familarise yourself with how to access Priiloader before the system menu should you ever need to recover your Wii. Press Home to exit GP DOP-IOS if you choose to do this in order to return to the homebrew channel. When finished installing Priiloader you can continue from step A5.*** （OK，这段搞明白了，由于4.2E只能装Bootmii to IOS，最好在做以下步骤前，做一个NAND的备份，貌似需要装Priiloader，然后再备份）据说BootMii就可以备份，不过zn好像没备份
7. Press down so Remove stubbed IOS is selected then press A. When asked to check for stub IOSs press A. A number of stub IOSs will be discovered. Press B for ‘NO’ for all IOS files except 222, 223, 249 and 250. Which you should press A to confirm deletion of. Press B for all other IOSs. When the discovery of stub IOS is complete you will be sent to the MMM menu. If you were not asked to remove 222,223,249 or 250 move to step 7.1. Otherwise to continue to step 8.
“读取USB硬盘需要IOS249.因此顺便装上IOS249,为了方便其他，222 223也一起装上，到这里你就可以插上USB用了”
是不是这个包里面实际装了最新版的IOS249，222，223，250，所以需要卸载掉机器本身的旧版的IOS249，222,223,250？
If you accidentally delete any other stub IOS, it is not the end of the world. However when inserting an original game disc it may ask you to update your system. Should this happen to you visit the ‘safe upgrade to 4.2 page‘, and follow the instructions in that guide to recover your IOS files to the latest versions.
7.1 Run Any Title Deleter MOD from the Homebrew Channel. Choose IOS36 and press A. Go to System Titles and press A. Select the following IOS files one by one and select A to delete them one after the other: IOS222 IOS223 IOS249 IOS250 If any of the above are not listed, check ‘other system files.’ If they are still not to be found, do not worry, just ignore and move onto the next step below, the guide may still work. Press home to exit when finished.
8. Still in MMM, press up to select Run WAD Manager, then press A.
9. Press 1 to select all the wad files in the folder, then press A to continue.
有点明白了，这个文件夹里面有如下文件：
cIOS202[38]-v65535.wad
cIOS222[38]-v65535.wad
cIOS223[37]-v65535.wad
cIOS224[60]-v65535.wad
cIOS249[57]-v19.wad
cIOS250[38]-v19.wad
IOS70-64-v6687[TB+ES_diV+NAND].wad
uLoader-UMRD.wad （这个应该就是uLoader4.9c吧）
应该是先卸载(step7)，再安装的意思(step8)
If you get any install errors with the above wads, try step 7.1 above and then try again.
10. When finished press home on your wiimote twice to exit back to the homebrew channel.
You are now set for playing backups on your Wii. （这句说明啥，可以开始玩了？怎么启动硬盘上的游戏？）
zn推荐教程，这个确实很详细
这个教程是很多人推荐的, 最详细的. 其他的所谓教程都是基于这个做的, 比如把文件全下载好打包供别人下载.
[ 本帖最后由 jl162401 于 2010-5-18 21:05 编辑 ] |
评分
-
查看全部评分
|
揭开8座豪华保姆车Nissan Elgrand (日产君爵)的面纱 (2013-1-30) 空瓶子 
发表于 2010-5-14 20:01
