|
|
此文章由 yxpma 原创或转贴，不代表本站立场和观点，版权归 oursteps.com.au 和作者 yxpma 所有！转贴必须注明作者、出处和本声明，并保持内容完整
如题，之前的旧遥控不好用了，在ebay上买了新遥控。明明买的是一个长得一模一样的，结果，收到才发现给了个compatible的.
最重要的是，完全没法根据寄来的instruction进行配对。
Instruction如下：
http://motepro.com.au/Instructions/eca.pdf
ECA Instructions
First Method: “Service – Free” Teaching Method
Take the operational remote control of the unit and stand about 2m’ from the receiver. Press and
hold both the buttons (III) and (I) simultaneously for 5 seconds (If this does not work, please hold
buttons (I) and (II) instead).
After releasing the buttons of the original remote control, the LED light in the receiver will turn on,
indicating that the receiver is ready to learn the new remote control’s button.
Choose, press and hold the one of the buttons on the NEW remote control for 5 seconds and then
release. The LED light will turn off to indicate that the remote control’s button has been learned
into the receiver’s memory.
This service will be available and operational only if the WT jumper in the receiver is OFF.
To cancel this feature, put on the WT Jumper into the pins in the receiver.
See the location of this Jumper in the receiver’s picture below.
Second method: Teaching a new remote control by the jumper in the receiver.
1. Remove the jumper “Clear” in the receiver and the LED light will turn on.
2. Choose, press and release the button on the new remote control, which you would like to operate
the receiver, for a period of five second.
4. Return the “Clear” jumper to its place.
5. Repeat steps 1-4 for teaching more remote controls.
我用了第一个办法，但是，第一步就不成功，新遥控上的灯根本就不亮。
第二个办法好像是要把旧的遥控肢解了---但是这个旧的如果被我拆坏了，我就彻底没遥控了。所以，也不敢试。
也曾试过在youtube上找视频，但是，不同型号的遥控，操作方式还是很不一样啊。
新旧遥控如图：
请各位大侠们指点，要如何解决配对问题。
比如，哪时有店可以帮忙进行配对？我很乐意支付一些服务费。或者，哪里有视频？
分分伺候！ |
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有帐号？注册
x
|
【贴图】墨尔本观景台上看全景--丽爱图塔(Rialto Towers)--南半球最高的办公建筑 (2005-4-14) powermao 
有声小说 -- 《落叶满地》 -- 祝新足迹四周年生日快乐 -- 下载链接在3楼 (2012-1-13) 闲夏采薇 
发表于 2018-3-17 10:04
