新足迹

 找回密码
 注册

精华好帖回顾

· 越南绝美小村庄“美奈”攻略 (2011-12-22) mjyang · 如何种好草莓 (2012-9-10) HALAN
· 交作业:长篇流水账,从考照到拍卖买车之路 (2013-8-30) dazzle · 跟我学做菜-4 麻婆豆腐 (2005-2-18) rong303
Advertisement
Advertisement
123
返回列表 发新帖
楼主:oonie

[NSW] Time to say good bye [复制链接]

发表于 2013-7-12 13:33 |显示全部楼层
此文章由 XZI 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 XZI 所有!转贴必须注明作者、出处和本声明,并保持内容完整
有船真好
Advertisement
Advertisement

发表于 2013-7-12 17:07 |显示全部楼层
此文章由 kingfisher8828 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 kingfisher8828 所有!转贴必须注明作者、出处和本声明,并保持内容完整
oonie 发表于 2013-7-12 13:23
You should aware of the true hull length is 5.5m for the clearwater. Don't be fooled by the model ...

Wow... that's a good piece of information there. Initially I thought that the hull length will be 5.75m as would the model 1900 shows.

I notice there is a few 2100 (6.1m) Whittley Clearwater walkaround available in NSW and doubtful if they are too heavy and bulky to launch as with the ramp here in Port Phillip Bay.

For example when there is a neap tide in certain ramp in Port Phillip Bay the highest level is slightly 0.5m of water.  It is often seeing people get stranded on shallow water waiting for high tide to launch or retrieve their boats.

What do you reckon the clean weight with engine for such boat?

There is this Streaker 5.85 Tournament in Victoria for sale unfortunately it is powered by a 2 stroke Yammie or els it would just slightly fit into my budget and purpose of usage. I am not sure the Yammie dealer would do good trade-in deals do they?

发表于 2013-7-12 20:11 |显示全部楼层
此文章由 oonie 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 oonie 所有!转贴必须注明作者、出处和本声明,并保持内容完整
kingfisher8828 发表于 2013-7-12 17:07
Wow... that's a good piece of information there. Initially I thought that the hull length will be  ...

Is your tow car 4x4? Just reverse till the rear wheels touch the water.

It doesn't matter the weight of the boat.

The main thing is the trailer design. The boat sits low on the trailer which mean less chance for the boat rear hit the bottom.

Always winch on in such depth even with drive-on type trailer.

发表于 2013-7-12 20:54 |显示全部楼层
此文章由 up2u 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 up2u 所有!转贴必须注明作者、出处和本声明,并保持内容完整
上面这2位母语都是中文的吧???

发表于 2013-7-12 21:15 |显示全部楼层
此文章由 oonie 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 oonie 所有!转贴必须注明作者、出处和本声明,并保持内容完整
up2u 发表于 2013-7-12 20:54
上面这2位母语都是中文的吧???

Bad Chinese typo here XD

发表于 2013-7-12 23:07 |显示全部楼层
此文章由 kingfisher8828 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 kingfisher8828 所有!转贴必须注明作者、出处和本声明,并保持内容完整
oonie 发表于 2013-7-12 20:11
Is your tow car 4x4? Just reverse till the rear wheels touch the water.

It doesn't matter the wei ...

Maybe I misrepresent my description previously, what I meant is the ramp and seabed in certain Port Phillip Bay area are shallow and if the boat is heavy, especially fiber, then the hull will be dragging along the ramp and seabed.

I saw before a 6mtr alu boat only needs 0.5mtr depth of water to propel, the bouyancy varies significantly between both materials.
Advertisement
Advertisement

发表于 2013-7-12 23:11 |显示全部楼层
此文章由 kingfisher8828 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 kingfisher8828 所有!转贴必须注明作者、出处和本声明,并保持内容完整
up2u 发表于 2013-7-12 20:54
上面这2位母语都是中文的吧???

As similar to Oonie, my Chinese typing is bad and slow, furthermore my Chinese literature or sentence structuring is incompetent 献丑献丑

发表于 2013-7-14 00:12 |显示全部楼层
此文章由 oonie 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 oonie 所有!转贴必须注明作者、出处和本声明,并保持内容完整
kingfisher8828 发表于 2013-7-12 23:07
Maybe I misrepresent my description previously, what I meant is the ramp and seabed in certain Por ...

Make a extension with a hub and wheel for the trailer in such condition. I reckon under $500 to DIY.

You don't like to have a few scratches even on alu boat.  

发表于 2013-7-14 18:08 |显示全部楼层
此文章由 kingfisher8828 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 kingfisher8828 所有!转贴必须注明作者、出处和本声明,并保持内容完整
oonie 发表于 2013-7-14 00:12
Make a extension with a hub and wheel for the trailer in such condition. I reckon under $500 to DI ...

Of course... my boat will be my prime property before my fishing tackles and I will NOT allow any scratches to my toy!

I spend more time caressing and looking after my toys than my wife though...

发表于 2013-7-14 19:57 |显示全部楼层
此文章由 up2u 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 up2u 所有!转贴必须注明作者、出处和本声明,并保持内容完整
1,我以前whittley sea legend 630 + 175hp, 吃水 0.5m,现在haines hunter 146 + 60hp 吃水 0.4m...
2,你船上如果碰地最先碰的地方是发动机,不是船身
3,一般主要的 boat rump,channel 的水深对于这些船基本都够用的了。

发表于 2013-7-15 17:46 |显示全部楼层
此文章由 kingfisher8828 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 kingfisher8828 所有!转贴必须注明作者、出处和本声明,并保持内容完整
up2u 发表于 2013-7-14 19:57
1,我以前whittley sea legend 630 + 175hp, 吃水 0.5m,现在haines hunter 146 + 60hp 吃水 0.4m...
2,你 ...

For example where I use to launch my boat in North Eastern Port Philip Bay the water level can be as shallow as 1 feet or so during Neap tide. We may adjust our engine with the tilt however I seen people dragging/pushing their boats in knee-high water.

By saying that if I do change to a bigger/heavier model I would have launched from other deeper ramps, by travelling further and paying more parking fees.

Unfortunately certain launching facilities in Victoria need proper maintenance like dredging or patching uneven holes.

During Snapper season here you see lots of weird boaters, not to mention people abuse each other and fighting involves too. Certain ramps you can actually see police officers stationed at the spot.

You are lucky to get your boat in the water within 2 hours in queue during peak season. Fishing and boating suppose to be receational and relaxing but it can also turns violence and tension.

Looks like I need to tow my boat and migrate to your state, in terms of better facilities and fishing qualities...   
Advertisement
Advertisement

发表于 2013-7-15 18:31 |显示全部楼层
此文章由 Chat 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 Chat 所有!转贴必须注明作者、出处和本声明,并保持内容完整
whittley的SL22的BEAM也只有2.2meter,与其他几家H打头的厂家相比,在6.5米长的船,BEAM都是2.4. 请问UP哥,BEAM2.4,抵抗横向风浪会更好一些吗?还有SL22这个船配的VOLVO 200HP的性能可靠吗?

发表于 2013-7-15 19:01 |显示全部楼层
此文章由 up2u 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 up2u 所有!转贴必须注明作者、出处和本声明,并保持内容完整
Chat 发表于 2013-7-15 18:31
whittley的SL22的BEAM也只有2.2meter,与其他几家H打头的厂家相比,在6.5米长的船,BEAM都是2.4. 请问UP哥, ...

sealegend 的倾斜会有点大的,但是抗横向风浪这20cm是看不出来那么多不同的,主要是hull的设计上,在吃水后V后面的变化。
至于volvo 200HP,确实没啥研究,我一直以为用在大的柴油引擎上的。

发表回复

您需要登录后才可以回帖 登录 | 注册

本版积分规则

Advertisement
Advertisement
返回顶部