|
|
此文章由 microtown 原创或转贴，不代表本站立场和观点，版权归 oursteps.com.au 和作者 microtown 所有！转贴必须注明作者、出处和本声明，并保持内容完整
各位老大，请教一下，小弟kuring gai，想之后推倒建房。想问问各位FSR的问题（具体估计还是要问builder，现在只是补补知识）。我看到这边一般FSR是0.3。而我这地79x平方，根据KLED 2015，小于800 的地可以0.4，那应该是0.3还是0.4 呢？另外，如果想搞大点，走da还是cdc好？
Despite subclause (2), the floor space ratio for a building on land in Zone R2 Low Density Residential where the site area is within a specified range in Column 1 of the table to this subclause must not exceed the ratio specified opposite in Column 2 of the table.
Column 1
Column 2
More than 1,700 square metres
0.3:1
More than 1,000 square metres but not more than 1,700 square metres
((170 + (0.2 × site area)) / site area):1
More than 800 square metres but not more than 1,000 square metres
((120 + (0.25 × site area)) / site area):1
800 square metres or less
0.4:1 |
|
初期小结 (2008-9-29) joaquin 
发表于 2020-10-26 00:01