|
发表于 2019-12-15 20:23
来自手机
|显示全部楼层
此文章由 七匹狼 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 七匹狼 所有!转贴必须注明作者、出处和本声明,并保持内容完整
本帖最后由 七匹狼 于 2019-12-15 21:25 编辑
谢谢推荐,我查了下,以下方案是否可行呢:
用colorbond把水泵区域围一圈,做成180cm高度作为新的fence,中间开个口用标准泳池gate加上latch和hinge,相当于把这个水泵区域“关起来”。
Build an inner fence, so that if a child does climb the fence from the neighbour's side, they are confronted with a second, compliant barrier. The inner fence may be as small as a simple L- or U-shaped structure (a corral) that meets up with the boundary fence (at least 900 mm on either side of the non-compliance), or as large as a new fence that completely surrounds the pool (an isolating fence). In effect, you are making the non-compliant stretch of fencing no longer part of the pool barrier.
This solution also works well to isolate doorways, non-compliant gates and climbable pool equipment |
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?注册
x
|