|
此文章由 dayanwawa 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 dayanwawa 所有!转贴必须注明作者、出处和本声明,并保持内容完整
我有一个瓶子 发表于 2017-3-15 15:31 
我妈妈在中国也是用的这个,一摸一样就没有黑点点跑出来。
我在这里也用的这个,特别是头几天,黑点点很 ...
http://www.brita.com.au/brita/au ... filtration/faq.grid
是椰子壳烧的活性炭 据说吃了没事 把filter水里洗洗能洗掉
The black particles are parts of one of BRITA's filter media, the activated carbon. The granulated activated carbon is made of coconut shells. Like each natural product, coconut shells are subject to natural variances regarding product quality. This can lead to abrasion of parts of the carbon into your filtered water. To eradicate any carbon dust which may be present, preparation of your cartridge is crucial.
Please prepare as per your cartridge instructions or see "How to prepare your cartridge".
Please be assured that the contents of the cartridge are food grade and completely harmless to yourself and if accidentally consumed will be harmless to health. Their presence will not affect the performance of the cartridge.
If there are still dust or particles present after this initial preparation, then we would suggest that the cartridge is removed from the system and re-prepared by:
MAXTRA, Classic & Multifit cartridges:
Vigorously shaking under water, then re-install and flush through with two litres of water.
Inline, P 1000 & A 1000 cartridges:
Flush a futher two litres of water through the cartridge.
|
|