|
此文章由 seashell.qd 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 seashell.qd 所有!转贴必须注明作者、出处和本声明,并保持内容完整
seashell.qd 发表于 2015-9-18 15:25 
LZ在amazon买过手机,拿到澳大利亚来用吗?
今天做了一下研究,USA版的nexus 6拿到澳大利亚,有的运营商应该是可以用的。我用TPG 3G(Single Band 2100 MHz),band是WCDMA 1, 两种型号都支持的基本频段。贴出来给大家做个参考。
https://en.wikipedia.org/wiki/UMTS_frequency_bands
GSM: 850/900/1800/1900 MHz
Model XT1103 (Americas):
CDMA band class: 0/1/10
WCDMA bands: 1/2/4/5/8
LTE bands: 2/3/4/5/7/12/13/17/25/26/29/41
CA DL bands: B2-B13, B2-B17, B2-29, B4-B5, B4-B13, B4-B17, B4-B29
Model XT1100 (International):
WCDMA bands: 1/2/4/5/6/8/9/19
LTE bands: 1/3/5/7/8/9/19/20/28/41
CA DL bands: B3-B5, B3-B8
TPG
4G Network
Customers who purchase a TPG T4G plan can only obtain 4G speeds when they use a 4G-ready phone (LTE 700/1800/2100/2300/2600 MHz) in 4G coverage areas as per the map above. When customers are not within a 4G coverage area of their mobile handset is not 4G compatible, the mobile service will automatically switch over to 3G or 2G and speeds will be much less than that of 4G
When inside 4G coverage areas actual speeds vary due to factors such as location, distance from the base station, local terrain, user numbers, hardware & software configuration and download source/upload destination.
Dual Band Network (2100/900 MHz)
You will require a dual band 2100/900 MHz compatible device to access the dual band 3G & 2G network.
3G Network (Single Band 2100 MHz)
You will require a UMTS 2100 MHz compatible device to access the 3G network.
2G Network (Single Band 900 MHz)
You will require a GSM/GPRS 900MHz compatible device to access this network. |
|