|
此文章由 Tacticool 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 Tacticool 所有!转贴必须注明作者、出处和本声明,并保持内容完整
不知你为何弄不了,是柜子的原因还是人为因素。
你买的夹万柜门上怎么只有两点锁?这不是NSW的合法AB枪柜啊,李察看能否以此为理由要求退货退款。
http://www.police.nsw.gov.au/__d ... et_-_March_2012.pdf
What are the minimum standards for locking mechanisms?
The minimum standards for the locking mechanisms for a Level 1 receptacle are
as follows:
* The door should be fitted with a three point locking mechanism (or similar)
which secures the door to the receptacle at various points around the door to
prevent unauthorised entry to the receptacle, OR
* The door should be fitted with a locking mechanism which is equivalent to or
exceeds that of a three point locking mechanism, (eg. a deadbolt or padlock).
* If the safe requires the fitting of an external lock (ie padlock), the lock must
have a minimum body width of 40mm and a hardened steel shackle. |
|