|
此文章由 os2 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 os2 所有!转贴必须注明作者、出处和本声明,并保持内容完整
Fences as exempt development in residential zones – Zone R1, R2, R3 R4 or RU5
To be considered exempt development:
Side and rear boundary fences must not be higher than 1.8 metres, or 1.2 metres if the fence is built from masonry.
Fences along a boundary of, or in the setback area of, a primary or secondary road must not be taller than 1.2 metres (this includes the front of the site and any side boundary on corner sites).
Fences along the boundary with, or within, the setback area to a secondary road must:
be at least 20 per cent transparent, above 400 millimetres
not have solid piers or posts wider than 350 millimetres.
https://www.planningportal.nsw.g ... -development/fences |
|