就是这个东西
https://www.peakdesign.com/products/capture
别人发的图片https://www.dpreview.com/forums/post/62555879
那个最上面的那个板装在相机底座，扭力超过1nm会造成液体露出的现象，我不知道是什么玩意就联系了官方，官方给我重新寄了一个，还是有这个现象，再次向官方反馈
官方解释如下：
Thanks for reaching out! I have already checked this with the design team and they have explained that this is due to the plasticizer in the PVC used in the plate pad and is inherent in this material due to the compression force on the plastic pad when attached to the camera.
We are looking into other possible materials as a few customers have now brought this up as a concern, but for the "anti-twist" function that is most important for the functionality of the plate, this material is the best, and this "leaking" is merely a cosmetic issue and should not cause damage to camera or screws. The trade-off of this cosmetic "issue" for the sake of optimal performance, was one that we decided was best for the overall performance of the product.
You should be able to wipe that off with some mild cleaner or some isopropyl alcohol and that will be gone over time.
总的来说就是什么增塑剂，设计团队已经考虑过这个问题，但是权衡之下，目前这样还是最好的防滑？解决方案，不会影响相机和螺丝，可以放心使用
总的来说PD的客服是非常非常给力，回复很快，补发也很快！ |
