Advertisement
Advertisement

新足迹

 找回密码
 注册
新足迹 门户 科技动态 查看内容

国际电讯联盟正式通过【5G标准】,规定至少 20Gbps 的下行和 10Gbps 的上行速率

2017-12-3 07:35| 发布者: jasonliu234 | 查看: 5810| 原文链接

今年 2 月份的时候,国际电讯联盟在日内瓦通过并发布了 IMT-2020 草案,为后续 192 个成员国的 5G 技术规范奠定了基础。与草案相比,最终版本的文档几乎没有变化。负责制定无线电通讯指导方针(包括 5G)的 ITU-R 5 号专家组顾问 Sergio Buonomo 表示:“对于如此高技术含量的报告来说,这种情况也是很正常的”。



理论上,一座 5G 基站可以为单用户提供至少 20Gbps 的下行和 10Gbps 的上行速率。但在实际情况下,区域内所有用户会共享这部分资源。好消息是,5G 可以支撑每平方公里至少百万级的用户。

简而言之,如果你想要下载一部 8GB 的高清电影,5G 下可以 6 秒钟完成。作为对比,4G LTE 需要占用 7~8 分钟的下载时间。更老的 3G 连接则需要 1 个小时以上。

不过 Buonomo 也指出,ITU 批准通过,只是标准化的第一步。他们将提出更多的报告和建议,让 5G 的设置要求更加扎实:
整个标准化的过程,可能要到 2019 年才会结束,届时 ITU 会给出包含完整技术建议的 IMT-2020 规范。

"The IMT-2020 standard is set to be the global communication network for the coming decades and is on track to be in place by 2020,” said François Rancy, Director of ITU's Radiocommunication Bureau. “The next step is to agree on what will be the detailed specifications for IMT-2020, a standard that will underpin the next generations of mobile broadband and IoT connectivity.”

  • The minimum requirements for downlink peak data rate is 20Gbit/s
  • The minimum requirements for uplink peak data rate is 10Gbit/s
  • Target downlink “user experienced data rate” is 100Mbit/s
  • Target uplink “user experienced data rate” is 50Mbit/s
  • Downlink peak spectral efficiency is 30bit/s/Hz
  • Uplink peak spectral efficiency is 15bit/s/Hz
  • Minimum requirement for user plane latency for eMBB is 4ms
  • Minimum requirement for user plane latency for URLLC is 1ms
  • Minimum requirement for control plane latency is 20ms
  • A lower control plane latency of around 10ms is encouraged though
  • Minimum requirement for connection density is 1,000,000 devices per km2.
  • Requirement for bandwidth is at least 100MHz
  • Bandwidths up to 1GHz are required for higher frequencies (above 6GHz)
  • Four classes of mobility are defined:

Advertisement
Advertisement


Advertisement
Advertisement
返回顶部