关于WINXP 时区设置的问题[求助]

kingguid

小弟在墨尔本，前几天进入夏时制了，本以为系统会自动改时间，结果没改，一看才发现时区是在布里斯班那一栏里，可是当我把时区改成堪培拉悉尼墨尔本，然后点确定（应用也试过。。）后，再打开一看还是时区不变，还是显示布里斯班。。。

请问这是怎么回事阿。。有没有人知道如何解决这个BUG？

[ Last edited by horseanddragon on 2005-12-28 at 05:25 PM ]

bctransit

时区是不会变的，把‘日照时间’的选项打上勾

bulaohu

kingguid  在 2005-12-28 05:21 PM 发表:

小弟在墨尔本，前几天进入夏时制了，本以为系统会自动改时间，结果没改，一看才发现时区是在布里斯班那一栏里，可是当我把时区改成堪培拉悉尼墨尔本，然后点确定（应用也试过。。）后，再打开一看还是时区不变，还 ...

I run into this several times myself. It seems to be triggered by install/uninstall certain applications. I did some search on the Internet but didn't find any answer to it, probably because it's a rare problem and unique to Australia - Brisbane and Sydney are actually both GMT + 10, the only difference is summer time.

So maybe at this moment the only workaround is to check this setting whenever you install/uninstall software...especially software like Flash Get, Thunder, BitComet, Emule, Firefox...I deeply suspect one of them caused the problem for me...

kingguid

bulaohu  在 2005-12-28 08:43 PM 发表:

I run into this several times myself. It seems to be triggered by install/uninstall certain applications. I did some search on the Internet but didn't find any answer to it, probably because it's a ...

thanks for your reply.
I've tried many times and cannot solve this bug. I agree with your conclusion how ever it's too much trouble to try uninstall/install applications.

Anyway, I am hoping some masters to share some hints on this problem.
THANK YOU VERY MUCH AGAIN.

Any ideas are welcome!

Poweregg

look

kingguid

Poweregg  在 2005-12-28 11:22 PM 发表:

look

thanks for kindly providing print screen.
I've already check that box for daylight saving, however, every time after you re-open the time-zone setting it will return back to Brisbane and without daylight saving.

and after syncronized by internet www.windowstime.com the time will be 1hr later than what you just setted for Melbourne.

cattor

楼上说的情况确实存在，我解决了，但忘了怎么解决的了。

我隐约记得是先关闭时间自动同步功能，然后修改时区到 悉尼，然后再开 时间自动同步，就好了。就是说每次改时区前都要先关闭时间自动同步，你试试看，希望帮到你。

kingguid

cattor  在 2005-12-28 11:34 PM 发表:

楼上说的情况确实存在，我解决了，但忘了怎么解决的了。

我隐约记得是先关闭时间自动同步功能，然后修改时区到 悉尼，然后再开 时间自动同步，就好了。就是说每次改时区前都要先关闭时间自动同步，你试试看，希 ...

thanks, I tried, it does not work on my PC.
Thanks for your help any way.

kingguid

cattor  在 2005-12-28 11:34 PM 发表:

楼上说的情况确实存在，我解决了，但忘了怎么解决的了。

我隐约记得是先关闭时间自动同步功能，然后修改时区到 悉尼，然后再开 时间自动同步，就好了。就是说每次改时区前都要先关闭时间自动同步，你试试看，希 ...

thanks, I tried, it does not work on my PC.
Thanks for your help any way.

kingguid

anyone can help me out on this one?

cattor

没办法，我试了无数次再也不能重现我是怎么改成功的了，要不你改动完了不要再次打开时间日期，马上重新启动一次看看？

Michaelzyu

哪里找得到自动同步功能？我的电脑上找不到了。

飞龙

估计有, 不过还是问问...

cattor

Michaelzyu  在 2005-12-30 10:47 AM 发表:

哪里找得到自动同步功能？我的电脑上找不到了。

你的机器是XP以上不？是的话，在时间日期功能里第三个选项卡就是了，叫做 INTERNET 时间。当然，权限要够哟！

[ Last edited by cattor on 2005-12-30 at 01:08 PM ]

kingguid

飞龙  在 2005-12-30 12:27 PM 发表:

估计有, 不过还是问问...

就我一个人用机器所以我自己就是管理员权限的账号。

老么劲

kingguid  在 2005-12-28 11:27 PM 发表:

thanks for kindly providing print screen.
I've already check that box for daylight saving, however, every time after you re-open the time-zone setting it will return back to Brisbane and without d ...

我也是和你一样的情况,每次设置完以后就回到布里斯班去了. 不过没有关系,你同步时间后,可以看到第一个选项卡里面有一条内容,"澳大利亚东部夏季时间". 以后如果到了夏令时结束的时候,会自动跳出一个对话框来告诉你已经调整回来了.

p.s. 如果切换到第二个选项卡,发现是布里斯班的时候,退出时千万别按确定,否则就会被设置成"澳大利亚东部标准时间"了,按取消或者直接关闭就没有关系,会一直保持在"澳大利亚东部夏季时间".

[ Last edited by 老么劲 on 2005-12-30 at 01:24 PM ]

kingguid

老么劲  在 2005-12-30 01:24 PM 发表:

我也是和你一样的情况,每次设置完以后就回到布里斯班去了. 不过没有关系,你同步时间后,可以看到第一个选项卡里面有一条内容,"澳大利亚东部夏季时间". 以后如果到了夏令时结束的时候,会自动跳出一个对话 ...

thanks very much, mate.

This one works well.

Wish all you guies happy new year

Michaelzyu

cattor  在 2005-12-30 13:08 发表:

你的机器是XP以上不？是的话，在时间日期功能里第三个选项卡就是了，叫做 INTERNET 时间。当然，权限要够哟！

我机器里看不到第三个选项。

cattor

楼主，问题基本解决，请查看链接：

http://www.oursteps.com.au/bbs/viewthread.php?tid=17278

kingguid

辛苦了，我试了一下。可是每当执行第4步的时候，当改回到中文/中国后，时区设置会自动返回到布里斯班。为了保持墨尔本/悉尼，必须保持“标准和格式”选项设为 英语（澳洲）。 然而这确实会带来一些楼主所提到的不方便的地方。
我想这确实是微软的大BUG.