|
|
此文章由 c4pe 原创或转贴，不代表本站立场和观点，版权归 oursteps.com.au 和作者 c4pe 所有！转贴必须注明作者、出处和本声明，并保持内容完整
问了AI，colorbond真的也有可能rust。我自己从来没见过rusted colorbond
Yes, Colorbond steel can rust under certain conditions, although it is specifically designed to be highly resistant to corrosion. Here's a breakdown of why and when rusting might occur:
Why Colorbond is Rust-Resistant:
Colorbond steel is manufactured with a multi-layered protective system:
Steel Base: The core is a high-quality steel manufactured to Australian Standards.
Metallic Coating (Zincalume): This is a crucial layer consisting of a zinc, aluminum, and magnesium alloy. This coating provides excellent corrosion resistance through a sacrificial action, meaning it corrodes preferentially to protect the steel.
Pre-treatment Layer: This thin layer optimizes the adhesion of subsequent coatings.
Primer Coat: A corrosion-inhibitive primer is baked onto the surface.
Topcoat: A specially developed, exterior-grade paint is baked on, providing the color and further protection against the elements.
Conditions That Can Lead to Rusting:
Despite its robust protective layers, Colorbond steel can rust if these layers are compromised or exposed to specific conditions:
Damage to the Coating: Scratches, dents, or cuts that penetrate the protective paint layers and the Zincalume coating can expose the underlying steel to moisture and air, leading to rust. Minor scratches are usually not a significant threat as the Zincalume can offer some self-healing properties at the edges. However, larger damage should be addressed.
Prolonged Exposure to Moisture: While rainwater runoff is generally not an issue due to the effective drainage of a properly installed roof, continuous exposure to moisture can cause rust. This can happen in situations like:
Soil Contact: Direct and prolonged contact with garden soil, which retains moisture, is a common cause of rust in Colorbond fencing and can also affect roofing near ground level.
Water Pooling: Areas where rainwater pools and doesn't drain away effectively can lead to prolonged exposure and corrosion. This could be due to poor installation, debris buildup, or design flaws.
Coastal Environments: While Colorbond is designed to withstand coastal conditions, areas very close to breaking surf (within 100-200 meters) with high salt spray may experience accelerated corrosion over time, especially if the coating is damaged or not a specialized grade like COLORBOND® Ultra.
Industrial Environments: Exposure to chemical fumes and fallout in industrial areas can also accelerate corrosion if the appropriate grade of Colorbond (like COLORBOND® Ultra) is not used.
Contact with Incompatible Materials: Direct contact with metals other than aluminum, galvanized steel, Zincalume steel, or zinc can cause galvanic corrosion in Colorbond steel. For example, water flowing from copper or lead surfaces onto Colorbond can lead to corrosion.
Lack of Maintenance: While low-maintenance, Colorbond benefits from occasional cleaning to remove dirt, debris, and salt buildup, especially in coastal areas. Trapped moisture under debris can contribute to corrosion.
|
|
浓香的记忆------妈妈的瘪子团 (2011-9-20) 明河素月 
楼主:c4pe
发表于 2025-4-7 19:22
发表于 2025-4-7 21:09
