|
|
此文章由 younme 原创或转贴,不代表本站立场和观点,版权归 oursteps.com.au 和作者 younme 所有!转贴必须注明作者、出处和本声明,并保持内容完整
本帖最后由 younme 于 2016-12-7 21:03 编辑
不是一平方米大概100左右吗,还没收到别家的报价,
-------------From hipages-----
How much does paving cost?
So how much will your paving project cost?
Paving can cost anywhere from $40 to $100 per square metre. That figure includes materials and labour. A number of factors will determine the final cost of your job, specifically:
the type of paving you choose
the size of your job
how much prep work is required, including levelling
how intricate your job is. Different types of pavers are easier to lay than others. For example, 500mm x 500mm square pavers might be easier and quicker to lay than smaller, rectangular pavers. If you're adding contrasting border pavers, bricks need to be cut for a complex pattern, it will cost more than a simple paving job. A sloping driveway will usually cost more than a level driveway. For example, a plain concrete driveway might cost around $65 per square metre on a level surface, but the same concreting company might charge $75 per square metre for a sloping surface.
Expect to pay in the region of:
$45 to $60 per square metre for concrete pavers
$40 to $70 per square metre for limestone pavers
$40 to more than $75 per square metre for quartzite pavers
$70 to $90 for brick pavers
$75 to $100 per square metre for granite, travertine and flagstone pavers
Paving around swimming pools needs to be slip resistant and able to withstand exposure to chemicals
How much does a base cost?
The base is important as it determines the stability and longevity of the pavers that rest on it.
Expect to pay in the region of:
$1,500 to $1800 for a crushed rock base for a site of 50 square metres with easy access and little preparation
$2300 to $2,800 for a poured concrete base for a site of 50 square metres with easy access and little preparation
|
|