|
|
此文章由 niuniumum 原创或转贴，不代表本站立场和观点，版权归 oursteps.com.au 和作者 niuniumum 所有！转贴必须注明作者、出处和本声明，并保持内容完整
更新一个链接
http://www.pic.vic.gov.au/consum ... rtificate-important
What should be on my Compliance Certificate?
Compliance Certificates are issued by licensed plumbers to certify that their plumbing work complies with all regulatory requirements. You should receive a Compliance Certificate for most plumbing work, including:
Where the total value of work, including materials, labour and GST, is $750 or more (material costs must be included, regardless of whether the materials were supplied by another person)
The installation, relocation or replacement of any Type A gas-using appliances, regardless of the cost (Compliance Certificates do not apply to Type B gasfitting work)
The conversion of a gas-using appliance for use with a different gaseous fuel
The installation, modification or relocation of consumer gas piping (other than work carried out on behalf of a gas company)
The construction, installation or alteration of any below ground sanitary drain or associated gullies
The construction, installation, alteration, relocation or replacement of a cooling tower or of any other part of a cooling tower system (including the installation or replacement of any associated device or equipment.
You should receive your Compliance Certificates within five days of completion of plumbing work. Only a licensed plumber may purchase and issue Compliance Certificates.
All work subject to a Compliance Certificate carries insurance to protect the consumer against defective work of the plumbing practitioner. You should retain your Certificate for six years as evidence of cover.
Registered Plumbing Practitioners are not able to issue Compliance Certificates and must either work under the supervision of a licensed practitioner or limit themselves to plumbing work that does not require a Compliance Certificate.
|
|
墨尔本 Mt Dandenong (2009-5-12) psveind 
发表于 2014-4-29 21:43
