|
|
此文章由 sssddt 原创或转贴，不代表本站立场和观点，版权归 oursteps.com.au 和作者 sssddt 所有！转贴必须注明作者、出处和本声明，并保持内容完整
https://zazz.com.au/daily/thingy/9492
•Easy plug-n-play setup and 128 bit AES security
•Each kit includes 2 x Powerline Adapters
•Maximum powerline speed up to 500Mbps
•Backward compatible with 200Mbps powerline adapters
•Features energy saving mode to reduce power consumption
•Utilizes existing electrical wires to transmit network data
•Powerline transmission range up to 300 meters
The power point adapter kit takes the existing electrical cabling in your house and converts it into a giant data network so you can quickly shoot data around your home while strengthening your existing wireless network. It also reduces the need for unsightly cables that run around your house or office, increasing safety and efficiency.
Product Features
•Transmit Network Data via Existing Electrical Wires - If your home or office does not have Ethernet cables installed in the wall and you dislike the idea of unsightly external cabling running all over the place, use the Edimax HP-5102K to turn the existing electrical wires in your home or office into a high-speed network connection. With the HP-5102K, annoying cable planning and installation are no longer necessary. The HP-5102K enables you to create a network environment easily and cost-effectively.
•500Mbps HomePlug AV Standard & IGMP Support - The Edimax HP-5102K not only complies with the HomePlug AV standard but also supports IGMP managed multicast streams. The HP-5102K can transmit network data over existing electrical wires at speeds of up to 500Mbps. It is also backward compatible with the 200Mbps HomePlug AV standard and has a transmission range of up to 300 meters. IGMP can be used for online gaming and video streaming applications, and allows for more efficient use of network resources. With the HP-5102K, you will be able to transfer high-definition video and digital audio quickly and easily.
•Coexistence with HomePlug 1.0 & 1.0 Turbo Devices - The Edimax HP-5102K is designed to ensure efficient coexistence with HomePlug 1.0 and 1.0 Turbo devices, providing guaranteed QoS to all the devices present in the heterogeneous powerline network. In such an architecture, the HP-5102K and other HomePlug 1.0 stations share the CSMA/CA allocations, thus providing fair access to HomePlug 1.0 stations based on traffic priority.
•Hardware Combo Group/Reset Button - The Edimax HP-5102K has a combo group/reset button for simplified group and reset configurations. Press the group/reset button and the HP-5102K will help you set up a password for your network automatically, or reset the device to factory defaults.
•128-Bit AES Encryption - With built-in compliance with the 128-bit AES encryption standard, the Edimax HP-5102K is able to give you superior powerline network security
Features and Technical Specifications
•Easy plug-n-play setup and 128 bit AES security
•Max. powerline speed up to 500Mbps
•Backward compatible with 200Mbps powerline adapters
•Features energy saving mode to reduce power consumption
•Utilizes existing electrical wires to transmit network data
•Powerline transmission range up to 300 meters
•Standards: IEEE 1901, IEEE 802.3, IEEE 802.3u
•Supports IPv6, IGMP, and MLD snooping
•Supports VLAN pass-through
•Integrated Quality of Service (QoS)
•Coexistence with HomePlug 1.0 devices
•128-bit AES link encryption security
•1MB Flash memory
•8MB SDRAM
•Frequency band 2-68MHz
•Measures 72 x 52 x 24mm
Warranty
12 months from Zazz
Shipping
This product requires extra lead time and is expected to leave our warehouse within 5 business days of purchase
|
|
狂欢。悉尼－－－28～30楼18＋～23＋更新 (2010-3-1) 老song 
发表于 2014-1-16 07:06
