|
|
此文章由 myusa 原创或转贴，不代表本站立场和观点，版权归 oursteps.com.au 和作者 myusa 所有！转贴必须注明作者、出处和本声明，并保持内容完整
本帖最后由 myusa 于 2013-2-21 14:50 编辑
仅供参考：
首先提醒： 要激活flybuys的offer，才能有2500的积分：
https://www.flybuys.com.au/flybu ... ampaignId=2532_2500
就是那个49.50的Y201手机，解网络锁大家都知道就不说了，下面是刚找到的如何ROOT的方法：
http://forum.xda-developers.com/showthread.php?t=2066887
附件在上面帖子里。
Huawei Ascend Y201 Pro U8666
Root + CWM Recovery
I am not responsible for any damage you may do to your phone by following this guide.
The files you will need, download them and extract them to a folder on your desktop:
RootY201Pro.zip
UnlockBootloader.zip
Recovery.zip
- Now, get your phone and go to Settings > Developer Tools. Make sure USB debugging is enabled.
- Also disable Fastboot in Settings.
- Connect your phone to your computer via USB and let it install the drivers. Make sure they are installed correctly. Do not select "Turn on USB storage" on your phone.
Root + Unlock Bootloader:
1. Go to the folder on your desktop where you extracted the files.
2. Right click on unlockbootloader.exe and select 'Run as administrator'.
3. Click "ROOT Your Phone", the program will work and then close on it's own.
4. In your phone, go to the apps drawer and there should be a new app called Superuser.
5. Now go to your PC, open the same program, but this time click "Unlock BOOTLOADER".
6. Let it finish, the program will close on it's own, and then power off your phone.
7. Unplug the phone from the PC and we are done.
You have now successfully rooted and unlocked the bootloader of your device!
Installing CWM Recovery:
1. Turn off your phone if it isn't already.
2. Press and hold the following buttons simultaneously for ~10 seconds: volume down + home button + power button
3. Release the buttons and your phone should not boot, it should be 'stuck'. That's what we wanted.
4. Connect your phone to the PC via USB. It should install the drivers fine.
5. Open CMD and browse to the folder in your desktop.
6. Once you are in the folder type the following commands:
6.a) fastboot erase recovery, then press Enter. Let it work...
6.b) fastboot flash recovery recovery.img, press Enter and let it work again.
6.c) fastboot reboot, and press Enter...
7. Your device is now rebooting. You can unplug it from the PC.
You have now installed CWM Recovery.
Instructions on how to boot to CWM Recovery:
1. Turn off your phone.
2. Press at the same time for ~5 seconds: volume up + power button
3. You should be now on CWM Recovery.
另外，非官方的ROM可以在这里下：
http://www.myhuawei.net/Forum-My-Huawei-Ascend-Y201-Pro
|
评分
-
查看全部评分
|
庆祝小泡周岁生日最后炮：杂记------关于过敏，回国延签etc. (2010-1-26) 美讶 
成长是一个不间断聊天的过程---- 更新2025年3月15日 (2021-6-21) yuxuanlin 
发表于 2013-2-21 13:46
